Dispersant NNO for Formulation and Process Applications
Dispersant NNO is an anionic sodium naphthalene sulfonate-formaldehyde condensate, documented under CAS 9084-06-4 on our safety data sheets (some suppliers list 36290-04-7, which we use for SNF concrete grades). It is evaluated as a particle-dispersion aid in dye, pigment, agrochemical and selected industrial aqueous systems. GREEN AGROCHEM supports grade selection, sample qualification and export documentation after reviewing the buyer’s formulation, process and quality requirements.
Request current documents: contact info@greenagrochem.com for the TDS, SDS and a representative COA for the exact offered grade.
Product identity and function
NNO is a polymeric condensation product rather than one discrete small molecule. Commercial grades should therefore be compared by CAS identity, manufacturing consistency and measurable specification—not by a single molecular formula. In a compatible aqueous system, adsorption at particle surfaces can help limit reagglomeration and maintain a workable dispersion. Performance depends on the particle surface, electrolyte load, pH, temperature, solids, shear, addition sequence and the other formulation components.
Dispersing, wetting, levelling and foam control are different functions. NNO should not automatically be presented as a universal wetting agent, dye leveller, latex stabilizer or superplasticizer. Define the required function and verify it in the complete formulation.
Grades and typical properties
Dispersant NNO is the sodium salt of naphthalene sulfonate formaldehyde condensate. It is an anionic, yellow-brown powder that dissolves fully in water and tolerates acid, alkali, hard water and inorganic salts. It does not foam and has no penetrating action.
| Parameter | GAC-NNO-A | GAC-NNO-B | GAC-NNO-C | GAC-NNO-HP |
|---|---|---|---|---|
| Solids | — | — | Not listed | 93% min (solids) |
| Dispersing power (vs. standard) | 95% min | 90% min | Not listed | — |
| Sodium sulfate | 5% max | 18% max | 22% max | SO4 about 3% |
| pH | 7–9 (1%) | 7–9 (1%) | 7–9 (1%) | 7.0–9.0 (2%) |
| Ca + Mg | 0.4% max | 0.4% max | See TDS | — |
| Water insolubles | 0.05% | 0.05% | See TDS | — |
| Water content | — | — | 8% max | — |
| Free naphthalene / formaldehyde / quinoline | — | Free formaldehyde 200 ppm max | < 5 ppm / < 50 ppm / < 200 ppm | |
Values from current Green Agrochem TDS documents (Rev. 1.0). Packaging: 25 kg woven bags with liner. Shelf life: 24 months unopened (A, B and C grades).
NNO as a textile dispersant
In textile dyeing, NNO is mainly used with disperse and vat dyes. It keeps finely ground dye particles dispersed during milling, storage and dyeing, and acts as a colloid protector in the bath. It has affinity for protein and polyamide fibres but not for cotton or linen. This is why it suits cellulosic dyeing and why its levelling effect differs on wool and nylon. Typical uses:
- Dispersant and filler in disperse and vat dye formulation (milling and standardisation).
- Dispersing agent in pad dyeing, suspension dyeing and leuco-acid dyeing with vat dyes.
- Levelling and anti-staining aid in dye baths, and soaping-off after dyeing.
Choose a low-sulfate grade (A or HP) when salts affect dye-bath stability or the electrolyte balance of the dye formulation. See also NNO with reactive dyes and NNO for pigments and dyes.
Application areas
- Dye manufacture and dye processing: screening can cover milling, standardization and dye-bath dispersion. See the NNO dye-processing selection and testing guide.
- Pigments, coatings and colour concentrates: evaluate particle-size distribution, viscosity, filtration residue, colour development and storage stability. See the aqueous pigment-dispersion guide.
- Agrochemical formulations: NNO may be screened in selected wettable-powder and suspension systems, subject to active-ingredient, surfactant and water-quality compatibility.
- Rubber and latex systems: distinguish aqueous filler or pigment preparation from latex and dry-rubber compounding. Use the rubber and latex qualification guide.
- Other industrial systems: ceramics, mineral slurries and process dispersions require application-specific testing. Concrete, leather and other industrial procurement topics are handled by the group’s Industrial Chemicals division.
How to select the correct grade
Begin with the buyer’s measurable acceptance criteria. Relevant controls may include appearance, moisture, pH at a defined concentration and method, inorganic salt, water-insoluble matter and an application-specific dispersion test. The required limits vary by grade and end use. Do not treat values copied from another supplier, another grade or an undated webpage as the specification for the material being offered.
| Selection question | Why it matters |
|---|---|
| What particle, dye or active ingredient must be dispersed? | Surface chemistry and particle size influence adsorption and workable addition level. |
| What are the pH, water hardness and electrolyte conditions? | Compatibility can change during dilution, salt addition, heating or storage. |
| Which endpoints define success? | Examples include viscosity, filtration residue, particle size, suspensibility, shade reproducibility or storage stability. |
| Which specification and test methods apply? | A numerical limit is useful only when the basis, method and grade identity are defined. |
| What packaging and logistics are required? | Package format, palletization, destination, Incoterm and shipment size affect the quotation and handling plan. |
Recommended qualification workflow
- Confirm the offered grade, batch identity and current TDS/SDS revision.
- Request a representative COA and identify each test method and reporting basis.
- Run a controlled laboratory comparison against the approved benchmark using the same raw materials, water and process sequence.
- Obtain the supplier-recommended starting trial range for the exact grade and define whether it is based on formulation weight, solids, active ingredient or another stated basis.
- Bracket the starting range and measure the agreed endpoints; do not convert a laboratory result into a universal production dosage.
- Confirm compatibility, storage behaviour and downstream process effects before a controlled plant trial.
- After approval, establish incoming-quality limits, retained-sample practice and change-notification requirements.
Documents available for buyer review
Depending on the grade and destination market, the technical and commercial review may include the current TDS, SDS, representative or batch COA, product and packaging identification, country-of-origin and shipping documentation. Regulatory suitability must be assessed for the buyer’s specific use and jurisdiction. A general industrial description does not establish food, feed, pharmaceutical or other regulated-use approval.
Download TDS and SDS (2026)
| Grade | Technical data sheet | Safety data sheet |
|---|---|---|
| NNO Grade A | TDS (PDF) | SDS (PDF) |
| NNO Grade B | TDS (PDF) | SDS (PDF) |
| NNO Grade C | TDS (PDF) | SDS (PDF) |
| NNO high-purity grade | TDS (PDF) | SDS (PDF) |
The COA of your batch is supplied with each shipment.
Packaging, storage and handling
Available packaging and storage instructions must be confirmed on the current quotation, TDS and SDS for the offered grade. Protect powder from moisture and package damage, use suitable dust-control and personal-protection measures, and follow site procedures for handling and spill management. Shelf life should not be assumed from a generic webpage; request the applicable dated statement.
Request a sample or quotation
For an efficient technical review, send the application, formulation type, material to be dispersed, current benchmark, required test method, estimated annual demand, preferred packaging and destination. If requesting a quotation, also provide shipment quantity and Incoterm. Contact info@greenagrochem.com.
Frequently Asked Questions
What is the CAS number of Dispersant NNO?
Our NNO grades are documented under CAS 9084-06-4. Some suppliers list 36290-04-7; compare the full chemical name and specification as well.
Which NNO grade is used for textile dyeing?
Grade A (5% max sodium sulfate, 95% min dispersing power) is the usual choice where salt and shade consistency matter; Grade B is an economy option. Test with your dyes.
Is Dispersant NNO a wetting agent?
No. It has no significant wetting or foaming action; it disperses particles. Pair it with a wetting agent where fast wetting is needed.
