Anionic surfactants

Sodium Methyl Oleoyl Taurate (CAS 137-20-2): Uses, Safety & Specs

Sodium methyl oleoyl taurate (CAS 137-20-2), a mild sulfate-free anionic surfactant: CIR safety, typical specs, uses in shampoo and detergents.

Sodium methyl oleoyl taurate (INCI: Sodium Methyl Oleoyl Taurate; CAS 137-20-2) is a mild anionic surfactant made from oleic acid and N-methyltaurine. It is the sodium salt of 2-(N-methyloleamido)ethane-1-sulfonate. Because its hydrophilic group is a sulfonate attached through an amide link, it is not a sulfate ester and is not ethoxylated. Green Agrochem supplies it as GAC-SMOT for sulfate-free personal care and selected industrial formulations.

Identity and typical properties (GAC-SMOT)

INCI nameSodium Methyl Oleoyl Taurate
Other namesSodium N-methyl-N-oleoyl taurate; sodium N-oleoyl-N-methyltaurate
CAS No.137-20-2 (7308-16-9 is also listed in the CIR report)
Molecular formula / weightC21H40NNaO4S / 425.6 g/mol
Surfactant classAnionic (N-acyl-N-methyltaurate)
AppearanceClear to pale yellow liquid; soft white paste at higher concentration
OdourSlight characteristic odour
pH (1% solution)7.0–9.0
Density1.0–1.1 g/cm³
Viscosity100–500 cP (concentration dependent)
SolubilitySoluble in water

Values from the current GAC-SMOT technical data sheet. Active content and batch results are stated on the COA.

Is sodium methyl oleoyl taurate safe for skin?

The Cosmetic Ingredient Review (CIR) Expert Panel assessed 20 alkyl taurate amides and taurate salts, including sodium methyl oleoyl taurate. Its final report (released 8 February 2016) concluded that they are safe in cosmetics in the present practices of use and concentration when formulated to be non-irritating.

  • Sodium methyl oleoyl taurate had the highest reported maximum use concentration in the group: 28% in bath products.
  • In rabbit eye tests it scored 2 out of 4 at 1% and was not considered an ocular irritant at that level. Undiluted (100%) it was a mild ocular irritant.
  • Like any surfactant, the finished product decides tolerability. The “non-irritating” condition is met by formulation and confirmed by testing, not by the ingredient name alone.

Why it is used in sulfate-free formulas

“Sulfate-free” claims usually exclude sulfate-ester surfactants such as sodium lauryl sulfate (SLS) and sodium laureth sulfate (SLES). Sodium methyl oleoyl taurate is a sulfonate, so it fits these claims. Because it is not ethoxylated, it also does not carry the 1,4-dioxane by-product concern linked to ethoxylated surfactants such as SLES. In shampoos and cleansers it is usually combined with amphoteric surfactants (for example cocamidopropyl betaine) or nonionic surfactants to build foam and viscosity.

Main applications

Shampoos, body washes and facial cleansers

Used as a primary or secondary surfactant in rinse-off products marketed as mild or sulfate-free. Typical work includes balancing foam, viscosity (salt response is weaker than with SLES) and pH stability.

Baby and sensitive-skin cleansers

The taurate’s mildness makes it a common choice for these products. No ingredient is “approved for babies” by itself. Brands should run tolerance tests on the finished formula (for example HRIPT and ocular alternatives) and meet local cosmetic regulations.

Detergents and industrial cleaning

The taurate’s tolerance of hard water and electrolytes is useful in specialty detergents, textile wetting baths and cleaning formulations. Compatibility with builders and other surfactants should be tested.

Agrochemical and other non-cosmetic uses

US regulations reviewed in the CIR report:

  • Residues are exempt from the requirement of a tolerance when the taurate is used under good agricultural practice as an inert ingredient in pesticides on growing crops (40 CFR 180.910) or on animals (40 CFR 180.930).
  • It may be used as a component of paper and paperboard in contact with food (21 CFR 176.170 and 176.180).

Pharmaceutical use

GAC-SMOT is a cosmetic and industrial grade. It is not supplied as a pharmacopoeial excipient. Pharmaceutical projects need a grade with the required pharmacopoeial and GMP documents.

Alternatives and how they compare

SurfactantTypePoints to compare
Sodium methyl cocoyl taurateTaurate (coconut fatty acids)Same taurate chemistry with shorter coconut-derived chains; widely used in sulfate-free shampoos. Compare foam and feel in the actual formula.
Sodium cocoyl isethionateIsethionate esterMild; often supplied as a solid for syndet bars and cleansers. The ester link is more sensitive to hydrolysis than the taurate amide.
Sodium laureth sulfate (SLES)Ethoxylated sulfateLow cost and easy to thicken with salt, but not “sulfate-free”; 1,4-dioxane must be controlled.
Alkyl polyglucosides (APG)NonionicMild co-surfactant; usually combined with an anionic for foam.

See also SLES and APG.

Handling, documents and supply

  • Use the current SDS for hazard classification, PPE and transport data. The concentrated raw material can irritate the eyes.
  • Store sealed, away from frost and direct heat; check the COA before use.
  • TDS, SDS and COA are available on request. Samples and quotations: info@greenagrochem.com (state application, active level, quantity and destination port).

Download TDS and SDS (2026)

GradeTechnical data sheetSafety data sheet
Sodium methyl oleoyl taurateTDS (PDF)SDS (PDF)

The COA of your batch is supplied with each shipment.

Frequently Asked Questions

What is sodium methyl oleoyl taurate used for?

It is a mild anionic surfactant used in shampoos, body washes and skin cleansers, as an emulsifier in creams and lotions, and in mild industrial cleaning and fabric softener formulations.

Is sodium methyl oleoyl taurate sulfate-free?

Yes. Its hydrophilic group is a sulfonate linked through an amide, so it is not a sulfate ester and is not ethoxylated.

What is the CAS number?

CAS 137-20-2.

Is it compatible with other surfactants?

Yes. The TDS lists compatibility with nonionic and anionic surfactants, and describes it as readily biodegradable.

What are its typical properties?

Clear to pale yellow liquid (soft white paste at higher concentration), pH 7.0–9.0 (1% solution), density 1.0–1.1 g/cm³, viscosity 100–500 cP.

What documents are available?

TDS, SDS/MSDS, COA, specification and packaging information are available on request; each shipment comes with a batch COA.

References

  1. Cosmetic Ingredient Review. Safety Assessment of Alkyl Taurate Amides and Taurate Salts as Used in Cosmetics, Final Report, released 8 February 2016 (Panel meeting 14–15 December 2015).
  2. US Code of Federal Regulations: 40 CFR 180.910, 40 CFR 180.930, 21 CFR 176.170, 21 CFR 176.180.
  3. Green Agrochem GAC-SMOT Technical Data Sheet, V1.0, August 2026.

Documents and samples

Request documents or a sample

Send the application, target performance, quantity and destination port. We reply with the matching grade, its TDS and SDS, a representative COA and a quotation.